BL983313 EC Controller วัดและควบคุมค่าคอนดักติวิตี้ (ย่านวัด 1999μS/cm) พร้อมใบรับรอง Certificate

฿17,290.00

BL983313 EC Controller วัดและควบคุมค่าคอนดักติวิตี้ที่มีขนาดกะทัดรัด  ขั้นตอนการสอบเทียบทำได้ง่ายด้วย Trimmers ที่แผงด้านหน้า ผู้ใช้สามารถเลือกโหมดการ Dosing แบบอัตโนมัติหรือควบคุมแบบ Manual สินค้าคุณภาพจาก USA

  • ย่านวัด 0 ถึง 1999 μS/cm
  • ค่าความถูกต้อง ±2%
  • พร้อมใบรับรอง Certificate of Calibration

สอบถามข้อมูลสั่งซื้อ ขอใบเสนอราคา

BL983313 EC Controller วัดและควบคุมค่าคอนดักติวิตี้ (ย่านวัด μS/cm) เป็นเครื่องควบคุมค่าความนำไฟฟ้า Conductivity Controller ที่มีขนาดกะทัดรัด

ย่านการวัด 0 ถึง 1999 μS/cm มีค่าความถูกต้อง ±2% ขั้นตอนการสอบเทียบทำได้ง่ายด้วย Trimmers ที่แผงด้านหน้า ผู้ใช้สามารถเลือกโหมดการ Dosing แบบอัตโนมัติหรือควบคุมแบบ Manual ได้โดยใช้สวิตช์บนแผงด้านหน้า

มาพร้อมกับรีเลย์ทำให้สามารถสั่งการ Dosing Pump (contact normal open and closed when measure > setpoint) เมื่อค่าค่าความนำไฟฟ้า EC สูงกว่าหรือต่ำกว่าค่าที่ตั้งไว้ ถูกออกแบบมาสำหรับการใช้งานที่มีพื้นที่จำกัด สินค้าคุณภาพสูงพร้อมใบรับรอง Certificate of Calibration จาก USA ขายราคาถูก จัดส่งทั่วไทย

Feature BL983313

  • Adjustable Dry Contact Dosing Relay  : The BL983313 features a dosing relay that is activated when the reading is above a user programmable set point.
  • Programmable Overdose Protection : For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.
  • Relay Control Override : With the flick of a switch the mini controller’s relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.
  • Multicolor LED Indicator : Multicolor LED indicator allows an operator to quickly check the status of the controller.  Green = Meter in measurement mode and reading is below the set point.  Orange/Yellow = Reading is above the set point and the relay is activated.  Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded.

Specifications BL983313

  • Range 0 to 1999 μS/cm
  • Resolution 1 μS/cm
  • Accuracy (@25°C/77°F) ±2% full scale
  • Calibration manual, with CAL trimmer
  • Dosing Relay maximum 2A (fuse protected), 250 VAC, 30 VDC
  • Dosing Selection relay activated (contact closed) when the measurement reading is greater than the setpoint
  • Setpoint adjustable from 0 to 1999 μS/cm
  • Overtime adjustable, typically from 5 to approximately 30 minutes
  • Temperature Compensation automatic from 5 to 50°C (41 to 122°F) with beta =2%/ºC
  • Power Supply models “-0”: 12 VDC adapter (included)
  • models “-1”: 115/230 VAC; 50/60Hz
  • Dimensions 83 x 53 x 99 mm

Ordering Information  BL983313-1 (115/230 VAC) and BL983313-0 (12 VDC) are supplied with mounting brackets, transparent cover and instruction manual.

ขนาดของ Panel สำหรับ EC Controller รุ่น BL983313 

หัววัดค่าคอนดักติวิตี้สำหรับ EC Controller รุ่น BL983313 

PDF Catalog

Brand

Hanna Instrument

Hanna Instruments เป็นผู้ผลิตเครื่องมือวิเคราะห์คุณภาพระดับโลก ก่อตั้งขึ้นในปี 2521 ในปาโดวาอิตาลีโดย Oscar และ Anna Nardo ฮันนาอินสตรูเมนท์มีเครือข่าย บริษัทย่อยมากกว่า 40 แห่งใน 32 ประเทศทั่วโลก ฮันนาอินสตรูเมนท์สมีสำนักงานใหญ่ในวูนซอกเก็ตโรดไอส์แลนด์และมีโรงงานผลิตในมอริเชียสสิงคโปร์ฮังการีและโรมาเนีย โรงงานผลิตทั้งหมดได้รับการรับรองมาตรฐาน ISO 9001 ในปีพ.ศ. 2523 Hanna Instruments ได้พัฒนาเครื่องวัดค่าการนำไฟฟ้าแบบพกพาแบบหัวเข็มเดี่ยวเครื่องแรก ในปี 1984 ฮันนาอินสตรูเมนท์ได้พัฒนาเครื่องวัดค่า pH แบบพกพาที่ใช้ไมโครโปรเซสเซอร์ตัวแรก 2528 ในฮันนาอินสตรูเมนต์สกลายเป็น บริษัท แรกที่แนะนำอิเล็กโทรดพีเอชพร้อมเซ็นเซอร์วัดอุณหภูมิในตัว ในปี 1988 ฮันนาอินสตรูเมนต์สเป็น บริษัท แรกที่แนะนำอิเล็กโทรด ในปี 1992 ฮันนาอินสตรูเมนท์สกลายเป็น บริษัท แรกที่เสนอเครื่องวัดค่า pH แบบพกพาพร้อมการพิมพ์กระดาษธรรมดา ในปี 1997 ฮันนาอินสตรูเมนท์สกลายเป็น บริษัท แรกที่เสนอเครื่องวัดค่าพีเอชที่มีหัวต่อสองขั้ว ในปีพ. ศ. 2543 ฮันนาอินสทรูเมนท์ส์กลายเป็น บริษัท แรกที่นำเสนอเครื่องทดสอบพ็อกเก็ตแบบหลายพารามิเตอร์ Hanna Instruments มีประวัติของการพัฒนาผลิตภัณฑ์ที่เป็นนวัตกรรมที่ทำให้การวัดเชิงวิเคราะห์ง่ายขึ้นในราคาที่เหมาะสม นวัตกรรมมากมายที่ฮันนานำมาใช้เป็นบรรทัดฐานสำหรับอุตสาหกรรมเครื่องมือวัด ปัจจุบัน Hanna Instruments ผลิตสินค้ากว่า 3,000 รายการในโรงงานผลิตที่ตั้งอยู่ในสหรัฐอเมริกา โรมาเนียอิตาลีและมอริเชียส เราภูมิใจที่จะนำเสนอโซลูชั่นที่เป็นเอกลักษณ์สำหรับลูกค้าของเรา เรายังคงพยายามทำความเข้าใจกับความท้าทายที่ลูกค้าของเราต้องเผชิญในการทำการวัดวิเคราะห์เพื่อให้เราสามารถพัฒนาโซลูชันที่จะให้วิธีการวัดที่ง่ายและแม่นยำ
hanna

สอบถามข้อมูล สั่งซื้อ ขอใบเสนอราคา