HI504222 เครื่องวัดและควบคุมค่ากรดด่าง pH ORP Digital Controller พร้อมใบรับรอง Certificate

฿50,000.00

HI504222 เครื่องวัดและควบคุมค่ากรดด่าง pH ORP Digital Controller เป็นชุดควบคุมแบบ PID สำหรับวัดควบคุมและวิเคราะห์ระดับค่ากรดด่าง pH ORP โดยมีจุดตั้งค่าหนึ่งหรือสองจุดการตั้งค่า สินค้าคุณภาพสูงจาก USA

  • ย่านวัด pH ตั้งแต่ -2.00 ถึง +16.00 pH
  • ย่านวัดค่า ORP -2000 ถึง + 2000 mV
  • ย่านอุณหภูมิ -30 ถึง +130 องศาเซลเซียส
  • พร้อมใบรับรอง Certificate of Calibration

สอบถามข้อมูลสั่งซื้อ ขอใบเสนอราคา

รหัสสินค้า: HI504222-2 หมวดหมู่: ,

HI504222 เครื่องวัดและควบคุมค่ากรดด่าง pH ORP Digital Controller เป็นชุดควบคุมแบบ PID สำหรับวัดควบคุมและวิเคราะห์ระดับค่ากรดด่าง pH ORP โดยมีจุดตั้งค่าหนึ่งหรือสองจุดการตั้งค่า

การวัดค่า pH และ ORP จะถูกบันทึกแยกกัน การสอบเทียบค่า PH สามารถสอบเทียบได้ใน 2 จุด มีย่านวัดค่า pH ตั้งแต่ -2.00 ถึง +16.00 pH และย่านการวัดค่า ORP -2000 ถึง + 2000 mV

โดยมีช่วงอุณหภูมิตั้งแต่ -30 ถึง +130 องศาเซลเซียส คุณภาพสูงพร้อมใบรับรอง Certificate of Analysis จาก USA มีคู่มือการใช้งานภาษาไทย ขายราคาถูก จัดส่งทั่วไทย

วิดิโอแนะนำสินค้า HI504222

Features HI504222

  • Control pH or ORP
  • User selectable PID, PI, proportional on/off control of pH or ORP
  • Two user selectable dosing set-points plus 1 alarm relay set-point
  • Sensor Check for real time pH or ORP electrode status monitoring
  • Accepts inputs from either a digital transmitter or direct from an electrode
  • Matching pin compatibility to eliminate ground loop effect interference

Specifications HI504222

  • Range -2.00 to 16.00pH; -2000 to 2000 mV; -30 to 130.0°C
  • Resolution 0.01 pH; 1mV; 0.1°C (above -10°C; 1°C (below -10°C)
  • Accuracy (@25°C) ±0.02pH; ±2mV; ±0.5° (-9.9 to 130.0°C); ±1°C (-30 to -10°C)
  • Input impedance 1012 Ohm
  • Digital input for the pH/ORP/°C, Transmitter RS485
  • Other digital insulated inputs Two digital insulated inputs; one for hold and one for the advanced cleaning; ON state: 5 to 24 VDC
  • Digital insulated output Digital insulated contact closed upon hold mode
  • Temperature Compensation Automatic or manual, -30 to 130°C
  • Temperature probe three-wire or two-wire Pt100/Pt1000 sensor 9 with automatic, recognition and damage test
  • Power supply (depending on, model) 24 VDC/AC, 115 VAC ±10%, 230VAC ±10% or 100VAC ±10%; 50/60Hz
  • Power consumption 10VA
  • Over current Protection 400mA 250V quick blow fuse
  • Max Oscillation frequency 8MHz
  • Relays 1, 2, 3, 4 Electromechanical relay SPDT contact outputs 5A-250 VAC, 5A – 30VDC,(resistive load); fuse protected; 5A, 250V quick blow fuse
  • Alarm Relay Electromechanical relay SPDT contact output, 5A – 250VAC, 5A – 30,VDC (resistive load) fuse protected; 5A, 250V quick blow fuse
  • Analogue output Two independent outputs, 0 – 22mA (configuring as 0-20mA or 4-20mA)
  • Analogue Output resolution 0.1% f.s.
  • Analogue Output Accuracy ±2% f.s
  • Data logging 6000 pH/°C or ORP Samples
  • Environment 0 to 50° C ; RH max 85% non-condensing
  • Casing IP20 (housing); IP54 (front panel)
  • Weight 1.6kg

PDF Catalog

สอบถามข้อมูล สั่งซื้อ ขอใบเสนอราคา