BL931700 เครื่องวัดและควบคุมค่ากรดด่าง pH Controller มี Output 4-20mA พร้อมใบรับรอง Certificate

฿19,285.00

BL931700 เครื่องวัดและควบคุมค่ากรดด่าง pH Controller มี Output 4-20mA เป็นตัวควบคุมค่า pH มีเอาท์พุท 4 – 20 mA ผู้ใช้สามารถเลือกโหมดการ Dosing แบบอัตโนมัติหรือควบคุมแบบ Manual ได้

  • สามารถปรับค่า pH ได้ระหว่าง 0 ถึง 14 pH
  • ความละเอียด 0.01 pH
  • ความแม่นยำ ±0.02 pH
  • พร้อมใบรับรอง Certificate of Calibration

สอบถามข้อมูลสั่งซื้อ ขอใบเสนอราคา

รหัสสินค้า: BL931700-1  หมวดหมู่: ,

BL931700 เครื่องวัดและควบคุมค่ากรดด่าง pH Controller มี Output 4-20mA เป็นตัวควบคุมค่า pH Controller ที่มีขนาดกะทัดรัด

ย่านการวัดค่า pH ได้ระหว่าง 0 ถึง 14 pH และขั้นตอนการสอบเทียบทำได้ง่ายด้วย Trimmers ที่แผงด้านหน้า มีเอาท์พุท 4 – 20 mA และเอาท์พุทสำหรับเชื่อมต่อกับเครื่องบันทึกข้อมูล (Recorder Output ) หรืออุปกรณ์อื่นๆ

ผู้ใช้สามารถเลือกโหมดการ Dosing แบบอัตโนมัติหรือควบคุมแบบ Manual ได้โดยใช้สวิตช์บนแผงด้านหน้า

มาพร้อมกับรีเลย์ทำให้สามารถสั่งการ Dosing Pump เมื่อค่าความเป็นกรดด่างสูงกว่าค่าที่ตั้งไว้ หรือสามารถเลือกให้รีเลย์ทำงานเมื่อค่า pH ลดลงต่ำกว่าค่าที่ตั้งไว้ ออกแบบมาสำหรับการใช้งานที่มีพื้นที่จำกัด สินค้าคุณภาพสูงพร้อมเอกสารรับรอง Certificate of Calibration จาก USA ขายราคาถูก จัดส่งทั่วไทย

Feature BL931700

  • Enhanced Accuracy & Precision : The BL931700 model offers a manual two-point calibration with pH values displayed out to two decimal places.
  • External Disabling Feature : A normally open contact may connect to a level controller or flow monitor. This safety feature may be used to prevent continuous dosing in the event of specific or undesired system conditions.
  • Adjustable Dosing Relay : The BL931700 features a dosing relay which may be configured to dose above or below a user programmable pH setpoint.
  • Selectable Overdose Protection : The mini controller may be programmed to deactivate a valve, pump, or connected device if its activation continues over a selected time; adjustable from 5 to 30 minutes.
  • Selectable Control Override : With the flick of a switch, normal “Auto” operation may be overridden turning your connected device “Off” from operation or always “On.”

Specifications BL931700 Recorder Output 

  • Range 0.00 to 14.00 pH
  • Resolution 0.01 pH
  • Accuracy (@25°C/77°F) ±0.02 pH
  • Calibration manual, 2 points through offset and slope trimmers
  • Dosing Relay maximum 2A (fuse protected), 250 Vac, 30 VDC
  • Dosing Selection acid or alkaline : Contact open=acid dosage=relay ON if measurement > setpoint , Contact closed=alkaline dosage=relay ON if measurement < setpoint
  • Setpoint adjustable from 0 to 14 pH
  • Overtime adjustable, typically from 5 to approximately 30 minutes
  • Input Impedance 10¹² Ohm
  • Analog Output 4 to 20 mA, accuracy ±0.20 mA, 500 ¥ maximum load
  • Power Supply BL931700-0: 12 VDC adapter (included); BL931700-1: 115/230 VAC; 50/60Hz
  • Dimensions 83 x 53 x 99 mm
  • Weight BL931700-0: 200 g; BL931700-1: 300 g

Ordering Information BL931700-0 (12 VDC) and BL931700-1 (115V/230V) are supplied with mounting brackets, transparent cover and instruction manual.

ขนาด Panel สำหรับ BL931700 

Specification หัววัดสำหรับ BL931700 

PDF Catalog

สอบถามข้อมูล สั่งซื้อ ขอใบเสนอราคา